GENESTAE U3333 at 4063F9F0 LMOD VAN02051

Products

• Vantage Storage Resource Manager

Issue/Introduction

Users getting the below error message when running views related to "POOL" within the Windows GUI. 

A U3333 abend may occur in the GENLMPSV module during the License
Management Program (LMP) keys check, if Vantage exploits zIIP
processors (i.e. the Vantage system parameter ZIIPIT is set to Y).
 
This SYSMOD ensures that no zIIP abends occur during the LMP check.

GENESTAE U3333 at 4063F9F0 LMOD VAN02051 

COMPLETION CODE U3333 REASON CODE 00000000

Environment

Release : 14.1

Component : Vantage Storage Resource Manager

Cause

The following messages appear in the JESMSGLG part of the Vantage STC
log (there can be a different module instead of VAN02051) when a view is run that uses the "POOL" or "zIIP" reporting.

LMP check interrupts, but Vantage continues to run and produces the below message.

VAN0999E PGM GENLMPSV ABENDed on zIIP Server ZIIP1.
GENESTAE U3333 at 4063F9F0 LMOD VAN02051 CSECT VAN02051 +0029F0
CCSR021I OWNER = CA Vantage SRM R14.1
CCSR022I MODULE = VAN02051 FMID = CCTUE10 RMID = CCTUE10
CCSR061I PSW: 07851001 80000000 00000000 4063F9F0
CCSR062I ILC: 02 INTERRUPT CODE: 0D
CCSR067I COMPLETION CODE U3333 REASON CODE 00000000

Resolution

 The circumvention could be to temporarily set the Vantage system parameter ZIIPIT to N.

The solution is to apply the GA PTFS LU06996 and LU07025 and open a case to request the test APAR LU07481.