Threshold monitor for cluster disk(cdm in linux)

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

The threshold value has been setup in active and passive disks in cdm probe after the server reboot, the values are revoked, and monitoring of the disks are affected.

Environment

Release : 20.1

Component : UIM - CLUSTER

RHEL 7.9.

Resolution

Redhat 7 is not supported for cluster probe 3.70.

Please always check the UIM Compatibility Matrix.

UIM 20.1:

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/20-1/installing/product-compatibility/ca-uim-probes-support-matrix.html