What exactly is Disconnected User Timeout Period?
As you can see we specify 30 seconds. Looking at we've specified, does this mean that our session locks after 1hr of inactivity, and if no further activity occurs it disconnects from the terminal 3hrs later, and then 30 seconds later something happens, but what? All users virtual terminals are then cancelled?
Timeout Start Event .. ............+ TIO (default NONE)
First-level Timeout Period ........ 60.00 (default 0.0)
Timeout Action .......+ LOCK (default NONE)
Repeat Interval ....... 60.00 (default 0.0)
Second-level Timeout Period ....... 240.00 (default 0.0)
Timeout Action ......+ DISC (default NONE)
Repeat Interval ...... 0.0 (default 0.0)
Disconnected User Timeout Period 0.30 (default 0.0)
Actions Apply to Locked Sessions? YES (default YES)
Alarm Repeat Count ................ 3 (default 3)
Release : 5.0
Component : SOLVE:Access Session Management
The parameter "Disconnected User Timeout Period" is the time period before we CANCEL a DISConnected userid.
I ran a test -
Timeout Start Event ..............+ TIO (default NONE)
First-level Timeout Period ........ 2.00 (default 0.0)
Timeout Action .......+ LOCK (default NONE)
Repeat Interval ....... 0.0 (default 0.0)
Second-level Timeout Period ....... 1.00 (default 0.0)
Timeout Action ......+ DISC (default NONE)
Repeat Interval ...... 0.0 (default 0.0)
Disconnected User Timeout Period 2.00 (default 0.0)
Actions Apply to Locked Sessions? YES (default YES)
Alarm Repeat Count ................ 3 (default 3)
07.19.52 ===> LOG ENTRY:
<2 min lock>
07.21.52 N11B02 TERMINAL xxxxx LOCKED BY TIME OUT
<1 min disconnect>
07.22.52 N08H02 REGION <region> FOR <user> DISCONNECTED
07.22.52 N20E08 LOCAL USER <user> FORCED OFF FROM A01TE009 BY DISCONNECTION.
<2 min disconnected timeout>
07.24.52 N03909 $CMDENT FLUSHED. NCLID 000265
07.24.52 N03909 $NMPMENU FLUSHED. NCLID 000266
07.24.52 N20E08 LOCAL USER <user> FORCED OFF FROM <00019> BY TIME OUT.
07.24.52 N20E07 APPC LOCAL USER <user> LOGGED OFF FROM xxxxx USER TYPE MULTI