View - Receiving SARTPI48 message on a tape in SARPAC

Products

• View

Issue/Introduction

A SARPAC run shows the following messages:

IEF233D M 19C8,353138,,SAMSSAR1,STEP1,SYS3.SAR.SARTAPE.T0006905,  921           
        OR RESPOND TO IEF455D MESSAGE                                           
SARTPI48  Invalid header located for file                                       
IEF234E K 19C8,353138,PVT,SAMSSAR1,STEP1                                        
TMS014  IEF234E K 19C8,353138,PVT,SAMSSAR1,STEP1                                
SARTPI44  DUPLEX Tape does not exist or does not contain file - TSQ=6905        

IEF233D M 19C0,305612,,SAMSSAR1,STEP1,SYS3.SAR.SARTAPE.T0006970,  926           
        OR RESPOND TO IEF455D MESSAGE                                           

IEF233D M 19EC,PRIVAT,SL,SAMSSAR1,STEP1,SYS3.SAR.SARTAPE.T0007031,  927         
        OR RESPOND TO IEF455D MESSAGE                                           
IECTMS9 19EC,386985,SAMSSAR1,SYS00014,CATALOG   ,00001,.SARTAPE.T0007031        
IEC705I TAPE ON 19EC,386985,SL,COMP,SAMSSAR1,STEP1,SYS3.SAR.SARTAPE.T0007031,MEDIA2

IEF234E K 19C0,305612,PVT,SAMSSAR1,STEP1                                        
TMS014  IEF234E K 19C0,305612,PVT,SAMSSAR1,STEP1                                

Please let me know how to proceed. 

Environment

Release : 14.0

Component :

Resolution

Output from SARTSLST showed there to be only one active report that was never on the tape in question. 

The client was asked to do a SARBCH /DELETE on the report. 

As there were many reports from the same tape that were still active, the client was asked to do a SARTDR /TADD. 

After doing the /DELETE and the /TADD, the client reported that they were able to access a report that was on the tape.