DX UIM net_connect bulk configuration in IM is not working.

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

When configuring a Bulk Configuration it is not applying to the groups. 

Environment

• DX UIM 23.4 
• net_connect

Cause

Bulk Configuration needs both 'Add services if not existing' and 'Modify Host properties' selected. 

Resolution

In this example the services WINS_Replication & domain are to be added to Group2. 

•  Open Bulk Configuration and make the hosts selection.





•  Check the box for 'Add services if not existing'.

•  Select the services.



•  Check the box for 'Modify Host properties'.

•  Click apply and the services are added to the profiles. 

Additional Information

net_connect IM Configuration