Alarm - The probe snmpcollector cannot publish discovery results because an attach or post queue for the subject probe_discovery on the hub

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

The probe snmpcollector cannot publish discovery results because an attach or post queue for the subject probe_discovery on the hub /BPAPUIMWMV01_domain/bpapuimwmv03_hub/bpapuimwmv03/hub is not configured.

 

 

Environment

Release : 20.4

Component : uim -snmpcollector

Resolution

If snmpcollector is deployed on a secondary hub, please create a queue which can forward the discovery data to upstream hub from the hub where snmpcollector probe is deployed.

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/20-4/installing/discover-systems-to-monitor/configuring-discovery/configure-discovery-queues.html