ESF4332 // transformation failed with RC=8 Error Cannot switch to Medmap(HEADER).
search cancel

ESF4332 // transformation failed with RC=8 Error Cannot switch to Medmap(HEADER).

book

Article ID: 242564

calendar_today

Updated On:

Products

OM Spool

Issue/Introduction

Getting the following error message:

ESF4332 File  10525 xxxxxxxxx(yyyyyyy/pppppp  ) - A2PD transformation failed with RC=8   

The transformation report shows the following error:

ERROR.Job-1021.Error encountered in component AFP Parser of class afpparser, detail:- Error Cannot switch to Medmap(MAP001).  
<<<RuntimeError>>>...                                                                                                         
com.xenos.d2e.transform.common.j: Cannot switch to Medmap(MAP001).  Verify that the Formdef and FdFormdef parameters are valid

 

Environment

Release : 14.0

Component : Spool

Resolution

The most common reason for this type of error is that the FORMDEF does not contain the medium map requested by the data in the file.

If the AFP resources are correct then open a Spool case for further investigation.