ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

OPSMVS S102 ABEND in OPSMMG "OPS3000S ESTAE LEVEL 1 PROGRAM CHECK CODE=102"

book

Article ID: 240565

calendar_today

Updated On:

Products

OPS/MVS Event Management & Automation

Issue/Introduction

DR exercise OPSMAIN abended with the following message.

OPS3000S ESTAE LEVEL 1 PROGRAM CHECK CODE=102 TIME=16:26:16 SEQ=0 CPU=00 ASID=0026 (010D 010D) 

ESPSTRT - JOB=AOSEMAIL (57625) APPL= OSD=2022-04-27                            
OPS3000S ESTAE LEVEL 1 PROGRAM CHECK CODE=102 TIME=16:26:16 SEQ=0 CPU=00 ASID=0
OPS3006I PSW AT TIME OF ERROR 478C1000 815FCC72 ILC 4 INTC 11 RSCD 0000000C    
OPS3007I CURRENT ROUTINE NAME=OPSMMG ADDRESS=2235F000 OFFSET=000065EE          
OPS3008I GPR  0-3  00000088 00F70880 00000080 00000010                         
OPS3008I GPR  4-7  00000000 00001960 24260E38 00F70880                         
OPS3008I GPR  8-11 015FE748 80000000 7FFFAC40 7FFFAC40                         
OPS3008I GPR 12-15 00001960 80C00026 815FC67E 00000000                         
OPS3008I AR  0-3  00000000 00000000 00000000 00000000                          
OPS3008I AR  4-7  00000000 00000000 00000000 00000000                          
OPS3008I AR  8-11 00000000 00000000 00000000 00000000                          
OPS3008I AR 12-15 00000000 00000000 00000000 00000000                          
OPS3009I ABENDING LOCATION  OPSMMG+X'65EE'                                     
OPS3009I UNKNOWN  CALLED BY OPSMMG+UNKNOWN                                     
OPS3009I OPSMMG   CALLED BY OPEPEX+X'D7A2'                                     
OPS3259S Product shutdown started due to subtask failure - X'000004'           
OPS9998I Health Check CCS services terminated                                  
OPS9998I OPMTCANT: Notifications disabled                                      
OPS5006O Notify subtask terminating                                            
IST413I VTAM DUMPING FOR JOB OPSMAIN  STEP OPSMAIN                             

It results in an S102 abend in module OPSMMG

Cause

At DR site OPSMVS failing.  Root cause is:
The End Of Task exit that runs the EPI cleanup code was not called when
a REXX running in an OSF server ended.

Environment

OPSMVS - Release : 13.5
Z/OS 2.4

Resolution

PTF LU37388 resolves this abend.