ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Events in the Spectrum "MapUpdate -v" command output showing incorrect Precedence values

book

Article ID: 238059

calendar_today

Updated On:

Products

CA Spectrum DX NetOps

Issue/Introduction

Events in the Spectrum "MapUpdate -v" command output showing incorrect Precedence values. The Primary SS is showing a value of 20 and the Secondary SS is showing a value of 10:

./MapUpdate -v
Connecting to Location Server running at: lvnktest003201 port 0xdaff

Landscape   Service Type Name  Hostname           Port   Precedence  Notes
----------  ------------------ ------------------------------ ------ ----------  ------------------
0x1000000   Landscape Default  PrimarySS             0xbeef 10          16M model mask
0x1000000   Landscape              PrimarySS             0xbeef 10          16M model mask
0x1000000   Events                     PrimarySS             0xbafe 20          16M model mask
0x1000000   Landscape Default  SecondarySS        0xbeef 10          16M model mask
0x1000000   Landscape              SecondarySS         0xbeef 10          16M model mask
0x1000000   Events                    SecondarySS         0xbafe 10          16M model mask

Environment

Release : Any

Component : Spectrum Applications

Resolution

- Shutdown the Primary Archive Manager

- Shutdown the Secondary Archive Manager

- Killed the Location Server process on both the Primary and Secondary systems.

- Start the Archive Manager on the Primary system. Run MapUpdate to verify the Events show a precedence of 10 correctly.

- Start the Archive Manager on the Secondary system. Run MapUpdate to verify the Events show a precedence of 20 correctly.