ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

OPS3126E DYNAMIC ALLOCATION FAILED, RC=12, ERROR CODE=X'0360', INFO CODE=X'C032', DDNAME=SYSTSPRT

book

Article ID: 237241

calendar_today

Updated On:

Products

OPS/MVS Event Management & Automation

Issue/Introduction

We are upgrading OPS/MVS from 13.0 to 14.0 on one of our test LPAR's running z/OS 2.2

After the customization is done and when we IPL the system OPS/MVS is failing to start.
I have seen several dynamic allocation failure messages like below:

OPS3126E DYNAMIC ALLOCATION FAILED, RC=12, ERROR CODE=X'0360', INFO CODE=X'C032', DDNAME=SYSTSPRT, DSNAME=
OPS0036S OPEN OF SYSTSPRT DDNAME FAILED, RC=8
OPS0085H Subsystem OPSS SVC 95 microhook installed
OPS9541I Subsystem OPSS SVC 21 microstub installed X'10DBC790'
OPS9543I Subsystem OPSS SVC 21 microhook installed X'90C99038'
OPS9998I OPINAS: REGFEAT RC= X'00000028'  RSN= X'00000008'
OPS0053E JES2 initialization not complete
OPS3126E DYNAMIC ALLOCATION FAILED, RC=12, ERROR CODE=X'0360', INFO CODE=X'C032', DDNAME=AOFEXEC, DSNAME=
IEF196I OPS3126E DYNAMIC ALLOCATION FAILED, RC=12, ERROR CODE=X'
IEF196I INFO CODE=X'C032', DDNAME=AOFEXEC, DSNAME=
OPS3901E OPEN OF AOFEXEC FAILED, RC=8
IEF196I OPS3901E OPEN OF AOFEXEC FAILED, RC=8
OPS3126E DYNAMIC ALLOCATION FAILED, RC=12, ERROR CODE=X'0360', INFO CODE=X'C032', DDNAME=SYSEXEC, DSNAME=

Cause

Incompatibility of OPS 14.0 with z/OS 2.2 or older z/OS releases

Environment

Release : 14.0

Component : OPS/MVS

Resolution

The upgrade path should be:

1. Upgrade OPS from 13.0 to 13.5

2. Upgrade z/OS from 2.2 to 2.4

3. Upgrade OPS from 13.5 to 14.0