OneClick Web page login does not accept LDAP password after password change
Article ID: 233901
Updated On:
Products
Issue/Introduction
When I use the url http://spmXXXX:8888 and the first screen comes up, it will only allow me to log in with the password I changed 3 days ago. then the second place I have to login works as it should with my newer password. This is same issue on 3 different OC servers....
Environment
Release : 21.2
Component : Spectrum OneClick
Resolution
Always use the user that owns the Spectrum install whenever making configuration changes in the OneClick web pages. If there is a password, make sure to populate the password field before clicking on the save button.
Reference the following from https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/spectrum/21-2/release-information/features-and-enhancements2126.html#concept.dita_74630ff8e83cd59592f994d76127c7a97e847997_EnhancementsandPerformanceImprovements
This release enhances password security by masking the user-defined passwords in the GUI and configuration files. You must manually re-enter the password in the following scenarios:
Enable or disable the integrations
Test the integrations
Add or remove the servers
Feedback
