LSERV abends with a S0D3 REASON=13 DURING STARTUP
search cancel

LSERV abends with a S0D3 REASON=13 DURING STARTUP

book

Article ID: 232614

calendar_today

Updated On:

Products

Bundl

Issue/Introduction

CA LSERV may abend with a S0D3 Reason=13 during startup if
z/OS is at 2.4 and the parmlib DIAGxx member contains:
 
CBLOC REAL64(IHAASCB)
 
The abend could also happen at z/OS 2.5 if the DIAGxx
member does not contain:
 
CBLOC REAL31(IHAASCB)

The following errors appear in the LSERV task log:

LDM0500I File server task is now active                              
LDM0100I CA-L-Serv initialization complete                           
IEA995I SYMPTOM DUMP OUTPUT  620                                     
SYSTEM COMPLETION CODE=0D3  REASON CODE=00000013                     
 TIME=09.29.12  SEQ=03487  CPU=0000  ASID=03A3                       
 PSW AT TIME OF ERROR  470C1000   8001BB52  ILC 4  INTC 13           
   ACTIVE MODULE           ADDRESS=00000000_00012000  OFFSET=00009B52
   NAME=LDMBLKS                                                      
   DATA AT PSW  0001BB4C - 30AEB120  D0004770  3096D503              
   GR 0: 40000000   1: 000122D4                                      
      2: 3B600720   3: 0001BAD6                                      
      4: 3B6416F6   5: 00000000                                      
      6: 00000078   7: 8001867E                                      
      8: 3B641258   9: FF7A6F10                                      
      A: 40000000   B: 800122D4                                      
      C: 80ABA5B0   D: 00EEC580                                      
      E: 8001BB18   F: 00012000                                      
 END OF SYMPTOM DUMP                                                 
LDM0477E Scheduler. abended, completion code 0D3

Environment

Release : 5.0

Component : Bundl

L-Serv

Common Services

CCS

14.1

Resolution

Problem is resolved by Common Services/LSERV PTF LU00348:

L-Serv (Common component w/TNG Framework (CBUJE00))


Apar #LU00348 - S0D3 REASON=13 DURING STARTUP

Additional Information

CIRCUMVENTIONS:

- If running on a z/OS 2.4 system:

  Remove CBLOC REAL64(IHAASCB) from the DIAGxx member.

- If running on a z/OS 2.5 system:

  Add CBLOC REAL31(IHAASCB) to the DIAGxx member.