Symantec Identity Suite - How to assign a static IP to a NIC with VAPP Identity Manager 14.4CP1+

Products

• CA Identity Suite

Issue/Introduction

This document will guide you on how to assign a static IP to a NIC for 14.4CP1. NOTE: Additional NIC's can only be assigned once CP1 or higher has been assigned.

References:

https://techdocs.broadcom.com/us/en/symantec-security-software/identity-security/identity-suite/14-4/virtual-appliance/administering-virtual-appliance.html#concept.dita_484b93c7f06198e8b27adcc2537229358eb17777_14.4.1AddingAdditionalNetworkInterfacesandStaticRoutes

https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configuring_ip_networking_with_nmtui

Environment

Release : 14.4CP1

Component : VAPP Identity Suite

Resolution

Start the nmtui tool

Select Edit a connection

Select Wired Connection 2

 

Navigate to IPv4 and Highlight <Automatic> and press ENTER then Select <Manual>

Enter in the appropriate information

Select <OK>

Select <Back>

Possible Next Step:

Navigate to Activate a connection

Select <Wired Connection 2>

Select <Activate>

 

Additional Information

Depending on the network configuration, you may need to modify the new IP to be 111.111.11.11/24

Example: