search cancel

Using Maintenance Probe to prevent alerts

book

Article ID: 230459

calendar_today

Updated On:

Products

DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

How to use the Maintenance probe in maintenance mode to prevent alerts?

 

Environment

All versions of UIM

UIMMTM : UIM MAINTENANCE MODE

Resolution

Please refer to our Technical documentation show how to configure using Maintenance probe in maintenance mode to prevent alerts:
https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/20-3/configuring-and-viewing-monitoring-data/manage-groups.html#concept.dita_19f4336373e507b7feb74f8d7ebfc2ca757be861_SetMaintenanceWindowsforGroups

 

Additional Information

How to confirm that it is working correctly
lhttps://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/maintenance-mode-maintenance-mode/maintenance-mode-version-8-0.html