apm_bridge filling disk

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

Using apm_bridge 1.04hf2 and with log level set to 0, the probe is filling the disk with debug logs in the /opt/nimsoft/probes/service/apm_bridge/debug directory.

Stopping the probe and deleting all of the files in the debug directory, does not keep the directory clear for long as the logs repopulate.

Environment

Release : 20.3

Component : UIM - APMGTW

Cause

Extra login has been added and  turned on at the apm_bridge configuration file. 
One or more of the following keys have been added and turned from 0 to 1
<topology_service>
save_incoming_graphs = 1
log_outgoing_request = 1
publish_config_items = 0
</topology_service>
All the kesy are disabled by default value should be 0

Resolution

Set all keys back to default. (value=0)

Additional Information

Tech document link for more information

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/apm-bridge-ca-apm-bridge/apm-bridge-configuration.html#concept.dita_dcb08ecd8432455cf427546342fde96cc830e26b_TroubleshootingandAdditionalLogs