BGP4 Backwards Transition Traps are not alarming for certain BGP4 devices in DX NetOps SpectrumSpectrum
Article ID: 227406
Updated On:
Products
Issue/Introduction
Event 0x220011 is not alarming as expected when these traps are sent to Spectrum:
#BGP Peer Backwards Transition Trap
1.3.6.1.2.1.15.7.6.2 0x220011 1.3.6.1.2.1.15.3.1.14(1,2)\
1.3.6.1.2.1.15.3.1.2(3,0)
Environment
Release: Any
Component: Spectrum Alarm & Event Management
Cause
When reviewing the device there is a CiscoBGP4_App model but the above Event Code is mapped out of the box for a BGP4 App model.
Resolution
Copy these following entries from $SPECROOT/SS/CsVendor/Ctron_SNMP_Rtr/BGP4_App/AlertMap to $SPECROOT/Custom/Events/AlertMap
#BGP Peer Established Trap
1.3.6.1.2.1.15.7.6.1 0x220010 1.3.6.1.2.1.15.3.1.14(1,2)\
1.3.6.1.2.1.15.3.1.2(3,0)
#BGP Peer Backwards Transition Trap
1.3.6.1.2.1.15.7.6.2 0x220011 1.3.6.1.2.1.15.3.1.14(1,2)\
1.3.6.1.2.1.15.3.1.2(3,0)
#Cisco v1 BGP Peer Established Trap
1.3.6.1.2.1.15.6.1 0x220010 1.3.6.1.2.1.15.3.1.14(1,2)\
1.3.6.1.2.1.15.3.1.2(3,0)
#Cisco v1 BGP Peer Backwards Transition Trap
1.3.6.1.2.1.15.6.2 0x220011 1.3.6.1.2.1.15.3.1.14(1,2)\
1.3.6.1.2.1.15.3.1.2(3,0)
Feedback
