How to Create, Edit, and Delete Routing Domains on ProxySG
To edit the routing domains, please utilize the CLI of the appliance.
Note: If there are interfaces associated with the routing domain, this should be disassociated before the deletion.
To delete the routing domain, please refer to the guidance provided in the snippet below.
For configuring routing domains on ProxySG, please refer to the step-by-step guidance provided in the resource doc. with URL below. You are also able to edit the routing domain, following the same guidance.
https://techdocs.broadcom.com/us/en/symantec-security-software/web-and-network-security/proxysg/7-3/index/_configure/config_routing_domains/config_routing_domains_routing_domain_name.html
Additional docs.:
https://knowledge.broadcom.com/external/article/175295/add-a-static-route-for-a-routing-domain.html
https://knowledge.broadcom.com/external/article/165653/defining-a-static-routing-table-on-the-p.html
Also refer to page 315 in the CLI reference guide with the URL below, for further guidance.
https://broadcom-stage.adobecqms.net/content/dam/broadcom/techdocs/symantec-security-software/web-and-network-security/proxysg/6-7/generated-pdfs/CLI67.pdf