ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Policy Server log format with milliseconds is not in 3 digit format.

book

Article ID: 226412

calendar_today

Updated On:

Products

SITEMINDER

Issue/Introduction

smps.log and smtracedefault.log shows milliseconds in the time format since R12.8SP3.

[sample]
[752/4944][Thu Oct 14 2021 14:04:55.001][XPSIO.cpp:587][CXPSIO::InitialLoad][INFO][sm-xpsxps-00300] 1 Parameter(s) loaded from Policy Store, 1 total.


On R12.8SP5, this shows as below.
[752/4944][Thu Oct 14 2021 14:04:55.1][XPSIO.cpp:587][CXPSIO::InitialLoad][INFO][sm-xpsxps-00300] 1 Parameter(s) loaded from Policy Store, 1 total.

This causes confusion if this is 100 milliseconds or 001 milliseconds when analysing performance (such as the TraceAnalysisTool).

 

Environment

Release : 12.8.05

Component : SITEMINDER -POLICY SERVER

Resolution

This issue is fixed on R12.8SP6.

 

Additional Information

An updated version of TraceAnalysisTool that can handle this single digit millisecond will be made available on the communities.