ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
UIM 20.3 and 20.4 OC metric viewer Aggregation Interval
Article ID: 226368
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
Is it possible to change the interval for the metric viewer in the Operator Console?
Environment
Release : 20.3, 20.4
Component : OC- Metric viewer
Resolution
Aggregation Interval shows the data points on the chart according to the selected interval value.
UIM 20.3
The data interval is hardcoded and you won't be able to change it on version 20.3.
The minimum interval is 15 minutes when you select metric viewer for the last 1 hour, 12 hours, or 24 hours.
The maximum interval is 1 day when you select metric viewer for the last month or 3 months
UIM 20.4
You can change the aggregation interval and select the needed interval from the drop-down list (next to the chart duration drop-down list):
Additional Information
Feedback
Yes
No
Powered by
