ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Reporter log source post processing settings.

book

Article ID: 222357

calendar_today

Updated On:

Products

Reporter Reporter-VA

Issue/Introduction

The Reporter's Database would need a log source in order to load.

The log source has a setting on the action it should take on the access log file after it's been processed.

The setting is called 'Post Processing Action' and this article explains on how to check this setting on a running Reporter.

 

Resolution

Below are the steps to view the setting for the Log Source Post Processing Action:

 

1. Unload the Log Source. Click on the Action and select 'Stop Log Source'.

https://api-broadcom-ca.wolkenservicedesk.com/attachment/get_attachment_content?uniqueFileId=SGtsd58aZduzqzl6nT00yA==

 

2. Then on the Action and select 'Set Post Processing Action'.

https://api-broadcom-ca.wolkenservicedesk.com/attachment/get_attachment_content?uniqueFileId=yMHmeAon8d2hDCN9omlgVg==

 

3. The window below will show which setting has been set for this.

https://api-broadcom-ca.wolkenservicedesk.com/attachment/get_attachment_content?uniqueFileId=ysCy8xGEIZkQ2h/MH6Hj2w==