Prevent error GIM38201E using CSM to select specific PTF's in CARS

Products

• CHORUS SOFTWARE MANAGER

Issue/Introduction

Attempting to apply JCLCheck r12 CARS maintenance through CSM. Getting error 

 GIM38201E ** THERE IS A MODID ERROR FOR MAC ENTRY $JCLGLBL IN SYSMOD SO12415.                                           
 GIM31901I    SYSMOD SO12415 DOES NOT SPECIFY ST14776 ON THE PRE OR SUP OPERAND. ST14776 IS THE RMID FOR MAC $JCLGLBL    
              THAT IS CURRENTLY INSTALLED.                                                                               
 GIM22601I    APPLY PROCESSING FAILED FOR SYSMOD SO12415.   

 

Environment

CSM (Chorus Software Manager) 6.1

CA JCLCHK Release : 12.0

 

Cause

This was essentially an error in the PTF packaging which will be corrected in time.
At this time the CARS maintenance will fail without taking minor corrective action.

Resolution

You can have CSM ignore PTF's in error by selecting the 'Maintenance' tab and placing the relevant CARS level in the 'Show' field.  

This will identify the PTF's that are to be APPLY'd.

You can then 'deselect' any PTF's that are in error. 

Additional Information

Refer sample image for the location of Maintenance and Show fields.