ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

The number of targeted endpoints exceeds the maximum allowed per scan. Enter 1,000 or less endpoints.

book

Article ID: 222036

calendar_today

Updated On:

Products

Data Loss Prevention

Issue/Introduction

Symantec Data Loss Prevention

The number of targeted endpoints exceeds the maximum allowed per scan. 

Cause

The default limit for targeted Endpoints for Endpoint Discover Scans is 1,000.

The maximum recommended limit is 30,000 agents per Detection server.

Environment

Release : 15.8

Component : Enforce

Resolution

To change the setting, follow the steps:

  1. Edit the file Manager.properties
    Located at:
    Windows: C:\Program Files/Symantec\DataLossPrevention\EnforceServer\15.8.00000\Protect\config
    Linux: /opt/Symantec/DataLossPrevention/EnforceServer/15.8.00000/Protect/config

  2. Locate the setting: com.vontu.manager.discover.targets.edar.maxagents = 1000

  3. Change it to the desired value.

  4. Save the file.

  5. Restart the SymantecDLPManager service.

Done.