CADT880I UNABLE TO CONNECT TO IBM SERVER

Products

• Dynam for VM

Issue/Introduction

DYNAM/T VM server cannot access RMSMASTR after upgrading to z/VM 7.2. 

 

Environment

Release : 7.0

Component : CA-Dynam/T Tape Management for z/VM, Dynam for VM

z/VM 7.2

Running with the DYNVM Extension, which is a subset of Dynam/T VM and is serviced differently.  Also running the Extension on the DYNVMA user ID.

Resolution

PTF SO15055 is required to run DYNAMAVR on z/VM 7.2 that can be downloaded from the Broadcom Support Portal at:

 https://support.broadcom.com/web/ecx/solutiondetails?aparNo=SO15055&os=CMS

 

 

Additional Information

Need to apply PTF SO15055 that is required to run DYNAMAVR on z/VM 7.2.

Apply instructions:

1) Transfer the fix portion of this PTF to your VM System as an
   ASCII transfer:

   * If you are using FTP, specify ASCII prior to starting the
     file transfer.

   * If you are using a terminal emulator that invokes IND$FILE,
     specify or select the ASCII, and CR/LF options.

2) Transfer or rename the file with the name SO15055 ZAP.

3) Make a backup copy of the DYNAMAVR TXTLIB.

4) Apply the PTF using the ZAP TXTLIB command:

   --> ZAP TXTLIB DYNAMAVR ( INPUT SO15055

After you have applied PTF SO15055, we are going to make sure you have the correct version of DMSCSL TEXT installed in the CAUSRLIB TXTLIB:

1) Remove the installed DMSCSL TEXT from the CAUSRLIB TXTLIB:

   --> TXTLIB DELETE CAUSRLIB DMSCSL

2) Add the DMSCSL TEXT file from the z/VM 7.2 S-Disk (this is where it should be!):

   --> TXTLIB ADD CAUSRLIB DMSCSL

Now we are ready to rebuild all the DYNAMAVR components ...

1) Run the TQINST EXEC to regenerate the DYNAMAVR code.

2) Restart the DYNVM Server.