The channel logic then fails because some prerequisite variables aren’t set. We also observed that some servers were experiencing this problem at roughly 2-3 times the rate as others

Products

• CA Mobile Device Management

Issue/Introduction

There was an item we meant to bring up, and I wanted to check on it. We were running into this problem where channel sets were giving a critical status because some of the channels in the set weren’t being executed. The channel logic then fails because some prerequisite variables aren’t set. We also observed that some servers were experiencing this problem at roughly 2-3 times the rate as others. Did we have a ticket open for this issue? If not, can we create one?

Environment

Release : 18.1

MDM

Component : CA MOBILE DEVICE MANAGEMENT

Resolution

DE478412