Robot is restarted when applying probe configuration

Products

• DX Unified Infrastructure Management (Nimsoft / UIM)

Issue/Introduction

When applying probe configuration, the robot may be restarted and the error message below would be recorded on the probe log.

 

<the probe name>: ERROR: Value for key packages is <More than 2048 bytes>, should be less than 2048 bytes so will be left blank

Environment

Release : ANY

Component : UIM - ROBOT

Cause

The maximum length of key value is 2048 bytes on robot 9.33 or less. This is the cause of the problem.

Resolution

Please contact Broadcom support if this problem occurs. We will provide the hotfixes.