Change CICS ACF2 startup parm EXIT PROGRAM=ACFAESXC to PROGRAM=NO
Article ID: 216421
Updated On:
Products
Issue/Introduction
CICS/ACF2 parm has 'EXIT PROGRAM=ACFAESXC' and ACFAESXC has been assembled from the ACF2 sample library with no local modifications to the code.
Can this be safely changed from:
EXIT PROGRAM=ACFAESXC
to
EXIT PROGRAM=NO
Environment
Component : ACF2 for z/OS
Resolution
The ACF2 CICS interface provides this program (ACFAESXC) as a sample; you may elect to modify the program, create your own program, or not use any exit processing.
If no ACF2/CICS exits are used, then there is no need to assemble, and link the sample exit, just specify PROGRAM=NO in the ACF2PARM EXIT parameter.
Note:
Verify whether or not any exit points are actually active.
Get a listing of the acf2parms for this CICS region (or list C(CIC) exit records).
If all entries are set to NO then EXIT PROGRAM=NO can be processed.
If any exit entries are YES - further review is needed to verify if the exit program=ACFAESXC is needed.
The default values are "no" for all exits (see CAX1MAC1(ACFPARM))
EXIT PROGRAM=NO USER EXIT PROGRAM (SAMPLE=ACFAESXC)
EXIT ITEXIT=NO USER EXIT PROGRAM
EXIT IDLE=NO NO IDLE EXIT
EXIT IMPLIED=NO NO IMPLIED SIGN-ON EXIT TC5645T
EXIT INITIAL=NO NO INITIALIZATION EXIT
EXIT MESSAGE=NO NO MESSAGE CONTROL EXIT
EXIT MROIN=NO NO MRO INBOUND LID EXIT
EXIT MROOUT=NO NO MRO OUTBOUND LID EXIT TC5645T
EXIT POSTVALD=NO NO POST-VALIDATION EXIT
EXIT PREVALD=NO NO PRE-VALIDATION EXIT
EXIT SHUTDOWN=NO NO CICS SHUT-DOWN EXIT
EXIT SIGNAUTH=NO NO AUTHORIZED SIGN-ON EXIT TC5645T
EXIT SIGNOFF=NO NO SIGN OFF EXIT
EXIT SIGNON=NO NO SIGN ON EXIT
EXIT SOURCE=NO NO SOURCE NAME EXIT
EXIT TDJOBINH=NO NO TDJOBINH EXIT
EXIT TERMDISC=NO NO TERMINAL DISCONNECT EXIT.
EXIT TERMID=NO NO TERMINAL NAME EXIT
EXIT TIMEOUT=NO NO TERMINAL TIMEOUT EXIT.
EXIT UDEVICE=NO NO UN-SUPPORTED DEVICE EXIT
EXIT UDEVPW=NO NO PASSWORD REVALIDATION EXIT
Additional Information
For additional details review - CICS Interface Sample Macros/Programs
Feedback
