ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.

Enable XCF through LDAP

book

Article ID: 213068

calendar_today

Updated On:

Products

LDAP SERVER FOR Z/OS

Issue/Introduction

Implemented "ACF2 SYSPLEX XCF Services" and configured parameter enable_xcf within CALDAP.

Testing this function I've got an error on syslog and the error is visible an caldap debug trace too.

ACF79983 UNDEFINED NEWXREF PARAMETER SPECIFIED       
(20046A24)ra_Run_Command output: conn=4070 op=32 ppDataÝ0¨=ACF79983 UNDEFINED NEWXREF PARAMETER SPECIFIED 
(20046A24)ra_Run_Command: conn=4070 op=32 rows=1 user=LRZ3IDM command=F ACF2,NEWXREF,TYPE(ROL),XCF()      
(20046A24)ra_Run_Command() took(0.001)  seconds                                                           
(20046A24)<==ra_Run_Command() completed successfully                                                      
send_ldap_result: conn=4070 op=32 p=3                                                                     
send_ldap_result: err=80 matched="" text="LDP0122E ACF2 error issuing refresh"                            
send_ldap_response: msgid=41 tag=103 err=80                                                               

How dos one tell CA LDAP to use "XCF(*)" ?

Environment

Release : 15.1

Component : CA ACF2 Option for Db2

Resolution

 In order to specify the XCF parameter with a field, add the 'enable_role' to the SLAPD.conf. ENABLE_ROLE defines a comma-delimited list of sysids. For example to specify XCF(*) the slapd.conf should have:

enable_refresh_xref
enable_xcf
enable_role *