ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
spooler and hdb probes use wrong IP except for the controller probe
Article ID: 212796
Updated On:
Products
DX Unified Infrastructure Management (Nimsoft / UIM)
Issue/Introduction
We have an AIX robot that has direct communication with Hubs.
The robot.cfg has the settings below but the spooler and hdb probes use the incorrect IP instead of the IP defined in the robotip key
ip_version = ipv4
local_ip_validation = no
strict_ip_binding = no
robotname =
robotip = ##.##.##.##
Environment
Release : 20.3
Component : UIM - ROBOT
Resolution
Set the robotip_alias key with the same IP as the robotip setting
Feedback
Yes
No
Powered by
