GIM69149E 2 CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP.

book

Article ID: 211415

calendar_today

Updated On:

Products

CA Vantage Storage Resource Manager

Issue/Introduction

The CAUSER SYSMOD SUMMARY REPORT shows 3 messages:

-----------------CAUSER FMID MESSAGE ID PAGE ERROR DESCRIPTION AND POSSIBLE CAUSES RO89383 CCTUE00

GIM35965I 1 SYSTEM HOLD DDDEF ORIGINATED BY SYSMOD RO89383 WAS NOT RESOLVED. RO97682 CCTUE00

GIM69149E 2 CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP. RO98189 CCTUE00

GIM69149E 3 CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP.

Explanation: ------------ RO89383 contains a HOLD to add DDDEF SCCNOBJ. The two GIM69149E messages point to following messages in the APPLY CHECK:

GIM69149E ** CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP IN ZONE CAIT0. GIM22601I APPLY PROCESSING FAILED FOR SYSMOD RO97682.

GIM69109E ** ALLOCATION WAS NOT ATTEMPTED FOR SCCNOBJ BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS FAILED.

Environment

Release : 14.0

Component : CA Vantage Storage Resource Manager

Resolution

The CAUSER SYSMOD SUMMARY REPORT shows 3 messages:

------------------------------------------------------- CAUSER FMID MESSAGE ID PAGE ERROR DESCRIPTION AND POSSIBLE CAUSES RO89383 CCTUE00

GIM35965I 1 SYSTEM HOLD DDDEF ORIGINATED BY SYSMOD RO89383 WAS NOT RESOLVED. RO97682 CCTUE00

GIM69149E 2 CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP. RO98189 CCTUE00 GIM69149E 3 CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP.

Explanation: ------------ RO89383 contains a HOLD to add DDDEF SCCNOBJ. The two GIM69149E messages point to following messages in the APPLY CHECK:

GIM69149E ** CALLLIBS COULD NOT BE ALLOCATED FOR LMOD VNGCJSNP IN ZONE CAIT0. GIM22601I APPLY PROCESSING FAILED FOR SYSMOD RO97682.

GIM69109E ** ALLOCATION WAS NOT ATTEMPTED FOR SCCNOBJ BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS FAILED.

So these 2 messages are also caused by the missing DDDEF SCCNOBJ. Please add the missing DDDEF SCCNOBJ as described in the following HOLD DOC. Then add DDEF to the HOLDSYS list: (ACTION AO DB2BIND DEP DOC DYNACT ENH EXIT IPL SYS DDEF) Then rerun the APPLY CHECK and let me know.

++HOLD (RO89383) SYSTEM FMID(CCTUE00) REASON (DDDEF ) DATE (16099) COMMENT

( ... ************************** * STEPS TO PERFORM * **************************

1. Check if DDDEF SCCNOBJ exists in the target zone of your CA Vantage CSI, and check if the VANWEBUI sample GEN:01 exists in your CCTUSAMP library. If SCCNOBJ and VANWEBUI GEN:01 exist, you do not have to apply this sysmod. If only the SCCNOBJ exists, apply this sysmod. If the SCCNOBJ does not exist, proceed with step 2.

2. Customize and submit the following JCL, then apply the sysmod:

//JOBNAME JOB (ACCT-INFO),'YOUR-NAME',

// CLASS=C,

// MSGCLASS=X,

// NOTIFY=&SYSUID

//**************************************************************** //* *

//* THIS JOB DEFINES AN CBC.SCCNOBJ (METAL C RENT OBJECT *

//* LIBRARY) TO THE CA VANTAGE CSI TARGET ZONE * //* *

//* *

//* 1. CUSTOMIZE THE JOB CARD *

//* 2. CHANGE 'CAISMPE.GLOBAL' TO THE PREFIX OF YOUR SMP/E * //* DATA SETS *

//* 3. CHANGE 'CAIT0' TO TARGET ZONE NAME IF DIFFERENT THAN *

//* DEFAULT IS USED. *

//* 4. CHANGE 'CBC.SCCNOBJ' WITH SITE SPECIFIC NAME IF *

//* DIFFERENT THAN DEFAULT IS USED. *

//****************************************************************

//* * DEFINE THE SCCNOBJ TO THE TARGET ZONE *

//* **************************************************************

//STEP01 EXEC PGM=GIMSMP,REGION=0M,PARM='DATE=U'

//SMPCSI DD DSN=CAISMPE.GLOBAL.CSI,DISP=OLD

//SMPCNTL DD *

SET BDY(CAIT0) .

UCLIN .

ADD DD DDDEF(SCCNOBJ) SHR DA(CBC.SCCNOBJ) .

ENDUCL.