UIM Robots deployed via OC Inventory are put under the primary hub.

book

Article ID: 210005

calendar_today

Updated On:

Products

DX Infrastructure Management

Issue/Introduction

When deploying new robots via OC Inventory they are always put under the primary hub and then have to be moved to the secondary hub they are supposed to be under. Is there a way to avoid these extra steps? 

Environment

Release : 20.3

Component : UIM OPERATOR CONSOLE 

Resolution

When deploying a robot via OC Inventory it is automatically put under the hub that did the system discovery. So when doing the initial device discovery it is important to select the correct secondary hub to run the discovery so later when the robot is deployed it will be added under that hub. 

Additional Information

The relevant packages for the secondary hubs' local archive are: automated_deployment_engine, discovery_agent, java_jre, robot.exe, robot_deb, robot_hpux,  robot_rpm, robot_sol, vs2017_vcredist_x64, & vs2017_vcredist_x86. 

To add the probes to the secondary hubs local archive go to AC > secondary hub > archive > download.

Note: OC cannot auto-deploy the robots to AIX or z/Linux systems.