dirscan - Monitor shared file system


Article ID: 209921


Updated On:


CA Unified Infrastructure Management On-Premise (Nimsoft / UIM) CA Unified Infrastructure Management for z Systems CA Unified Infrastructure Management SaaS (Nimsoft / UIM) DX Infrastructure Management NIMSOFT PROBES


We need to monitor a shared file system\location on the server, can you please let me know if it is possible?

For example-> \\NetAppXXXXXXXsq.global.NNNNN.net\SXXXXDATA\XYZProfile\"


Release : 9.2.0

Component : UIM - DIRSCAN


It is possible to monitor a shared drive, but on Windows only. Non-Windows remote directories cannot be monitored. Please refer to the KB Article:

The dirscan probe can successfully monitor shared file systems with the following exceptions:

- You cannot run batch files from a mapped drive using the dirscan probe
- Non-Windows remote directories cannot be monitored

The underlying storage device where the file system is hosted does not matter to the probe.  As long as the probe can access the desired directories/files to be monitored on the shared file system, then it will be able to monitor them.

As long as the dirscan probe is installed on a Windows robot where you can access for example, the "\\Windows_Robot_Server.fully.qualified.domain\XXXX_ACL_NNNNNN\M_TEST\INT\ICC\ABC" shared directory, you should be able to monitor thw directory with the dirscan probe.

When you create the dirscan profile and enter the shared directory name in the Directory field on the Scan Directory tab of the New Profile dialogue, you will also be asked to provide the username and password required to access this network drive.  Once the correct information is provided and the profile is created, the probe will be able to monitor the network drive.

Additional Information

Unable to open network share with dirscan