UIM Upgrade procedure from 8.51 to 9.02

book

Article ID: 209690

calendar_today

Updated On:

Products

DX Infrastructure Management

Issue/Introduction

This is the basic  UIM Upgrade procedure from version 8.51 to version 9.02. There might be more detail steps required to b added depending on specific environment.

Environment

Release : 8.51

Component : UIM DOC

Resolution

General UIM 8.51 to 9.0.2 upgrade procedure:

 

1. First of all, please check the Compatibility Metrix if your platform can support the UIM 9.0.2 version.

 

2. Take Backup  of both Primary and Secondary hubs, and the server hosting uim database, ump robot.

 

3. And then follow the step 1-4 upgrade procedure . For downloading, follow this link.

 

3. If you want to stay on the UIM 9.0.2 version, there are some known issues for which you will need the install all the available HotFixes available for 9.0.2 version from this link

   - For the UMP and UIM Probe HotFixes, check the "Applicable To" column to find which HotFixes are for 9.0.2. Or, if you just want to upgrade to 9.0.2 - so that you can got to 20.3 (which is the recommended version now), you will have to follow 20.3 upgrade procedure. But, it is crucial that you install the 9.0.2 HotFixes if you want to stay on UIM 9.0.2.

 

Once you follow the upgrade procedure, if you see any specific issue not described in the above documentation, the specific issue will be needed to analyzed in detail individually.

 

Additional Information

Here are some helpful KBs on some known upgrade issues:

 

KB192145

KB125418

KB185790

KB141124

KB122872

KB142013

KB127520