CPU monitoring via CDM probe

book

Article ID: 207980

calendar_today

Updated On:

Products

DX Infrastructure Management

Issue/Introduction

How to have nimbus monitor the Top CPU-consuming processes? and how to Configure it?

Environment

Release: 20.3

Component: UIM - ALARM POLICY

Resolution

CDM probe is used to monitor the CPU, disk, and memory performance of the system on which the probe is deployed. The probe automatically identifies components and allows you to specify QoS parameters and thresholds for alarms.

You can enable monitor the Top CPU-consuming processes in alarm: specifies the number of top CPU-consuming processes that are included in CPU usage alarms.
Default: 5

https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/cdm-cpu-disk-memory-performance-monitoring/cdm-im-configuration.html#concept.dita_66fa380a7cb0428dee177673f8d36af8f50049cb_ConfigureAlarmandQoSProperties

On the IM> select the CDM robe> then Configure> then Advanced> then enable CPU Usage options and modify the number of the top CPU consuming processes. 

Attachments