Cannot extract robot_rpm.zip

book

Article ID: 207072

calendar_today

Updated On:

Products

DX Infrastructure Management

Issue/Introduction

We have this robot_rpm.zip located into Primary HUB archive and we want to use this file to install new 9.31 robot version into some new servers. We have a problem because if we try to extract robot_rpm.zip file a password is asked. We need binary files to make a new robot installation into new servers.

Environment

Release : 20.3

Component : UNIFIED INFRASTRUCTURE MGMT

Resolution

You don't need to open the robot_rpm.zip package.

To use robot_rpm you normally do the following:

1. Import it into the local archive if its not present (not into the archive on the filesystem, but you'll normally find that its already in your local archive by looking at your Primary Hub probe package archive)

2. Deploy that package via drag and drop to the Primary Hub

.That should automatically UNZIP and place the updated rpm files to the Primary Hub ...\Nimsoft\install\setup folder

3. Transfer the appropriate-relevant rpm package to the Linux server and use that rpm for the robot install/upgrade

Additional Information

https://knowledge.broadcom.com/external/article/123194

https://knowledge.broadcom.com/external/article/9924/installing-single-robot-using-rpm-and-an.html