Endevor Footprint report - CONRPT80 is failing against a PDSE loadlib

book

Article ID: 206889

calendar_today

Updated On:

Products

CA Endevor Software Change Manager (SCM)

Issue/Introduction

Running footprint report (CONRPT80 and CONRPT81)  and some libs are getting this errors - how can they be resolved?  

  C1BR3000: E003 FOOTPRINT DATA EXTRACTION FAILED (C1BR3030 RCODE=X'0010')
  C1BR1000: E003 DATA EXTRACTION FAILED (C1BR3000 RCODE=X'0010') - PROCESS  TERMINATED 

  ******** 

  07:05:33  SSA001I #6580XD8 JOBNO=48700 ASID=03CA SYSTEM=SY51 SYSR1=X4C1T1
  07:05:33  IEF403I #6580XD8 - STARTED - TIME=07.05.33 DATE=01/20/2021.020
  07:05:41  SVM4000I #6580XD8, REPORTS, BSTPCH, ATTEMPTING SPACVOLA FOR SYS21020.T070533.RA000.#6580XD8.R0116630, WRKT0P, 16
  07:05:41  SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
  07:05:41  IEC030I B37-04,IFG0554A,#6580XD8,REPORTS,BSTPCH,A30F,WRKT0P,
  07:05:41  SYS21020.T070533.RA000.#6580XD8.R0116630
  07:05:41  ERROR DESCRIPTION: IEC030I
  07:05:41  During end-of-volume processing, one of the following occurred: For an
  07:05:41  output data set all space was used, or for DASD the maximum extent
  07:05:41  limit was reached. Another volume could not be mounted.
  07:05:41  END ERROR DESCRIPTION: IEC030I
  07:05:42  +CCSR010E C1SSESTA SB37 at 00D7B66C LMOD IGG019AR CSECT N/A +N/A #6580XD8 N/A REPORTS
  07:05:42  +CCSR061I PSW: 00000000 00000000 075C1000 80E49B4A
  07:05:42  +CCSR062I ILC: 02 INTERRUPT CODE: 0D
  07:05:42  +CCSR067I COMPLETION CODE SB37 REASON CODE 00000004
  07:05:42  +CCSR064I DATA AT PSW 00E49B44 : 4100303C 0A0DB20A 00509808
  07:05:42  +CCSR065I HOME = 03CA  PRIMARY = 03CA  SECONDARY = 03CA

Environment

Release : 18.0 18.1 

Component : CA Endevor Software Change Manager

Resolution

A temporary dataset is getting a b37 ....

SVM4000I #6580XD8, REPORTS, BSTPCH, ATTEMPTING SPACVOLA FOR SYS21020.T070533.RA000.#6580XD8.R0116630, WRKT0P, 16
SVM4001I RECOVERY ATTEMPT FAILED TO PASS FLST/RLST CRITERIA
 IEC030I B37-04,IFG0554A,#6580XD8,REPORTS,BSTPCH,A30F,WRKT0P,

This temp dataset is created in the BSTPCH step of job:

//BSTPCH DD DSN=&TEMP,DISP=(NEW,DELETE,DELETE),
// UNIT=SYSDA,SPACE=(CYL,(1,2)),
// DCB=(RECFM=FB,LRECL=838)

To resolve the problem, Increase the space (10,5).