search cancel

After upgrading to SEDR 4.5 the web GUI is available on both the default port (443) as well as the custom configured port

book

Article ID: 203724

calendar_today

Updated On:

Products

Endpoint Detection and Response

Issue/Introduction

Prior to upgrade the Settings -> Global -> Management Port was changed from 443 to a custom port number.  After upgrading to SEDR 4.5 the web GUI (Graphical User Interface) becomes available on both the default port (443) as well as the custom configured port.

Environment

Release : 4.5.0

Component :

Resolution

Broadcom Engineering resolved this issue in version 4.6.0. Please update to the latest build to receive this fix.  If an upgrade to SEDR 4.6.0 is not possible, then use the workaround steps listed below.

  1. In the SEDR GUI navigate to Settings -> Global -> Management Port
  2. Click "Edit"
  3. Change the Management Port to 443 and click "Save"
  4. Navigate to Settings -> Global -> Management Port
  5. Click "Edit"
  6. Change the Management Port to the desired port and click "Save"