SYSVIEW: SO11553 and SO11610 holddata: add DIAG(NO) to the logstreams

Products

• SYSVIEW Performance Management

Issue/Introduction

Question about holddata action of PTF SO11553 for R15, and SO11610 for R16.

It says to use a job which add DIAG(NO) to the logstream.

Environment

SYSVIEW 15.0 & 16.0 - z/OS supported releases - 

 

Resolution

The online help for LGSTREAM was updated and went out with the next PTF. The help should now look like the following.

DIAG
Specifies whether additional diagnostics should be provided by the system logger under certain conditions.

Blank indicates (NO) and DIAG represents (YES) to allow diagnostic collection.