Why is there no real USERID in the CREATED BY field at the Monitor Definition screen?

Article Id: 20038

Status: Published

Updated On: 21-03-2018 07:16

Legacy Id: TEC599599

Products:

CA Mainframe Application Tuner

Issue/Introduction:

Description:

Why is there no real USERID in the CREATED BY field at the Monitor Definition screen, but the value 'Pre R9.0' or 'Pre R8.5', like shown below :

XA01 TUNTMON -------------- Monitor Definition ---------- Row 7 to 19 of 186  
COMMAND ===>                                                  SCROLL ===> CSR 
                                                                             
Primary commands: ADD xxxx, STAtus                         Server ID: MATUNER 
                                                              Status: ACTIVE  
Line commands: S - Select   A  - Analyze Normal   D  - Delete                 
               I - Invoke   AL - Analyze All      DD - Delete w/dsns          
               H - History  AA - Analyze Active   B  - Batch Reports          
               C - Copy     AW - Analyze Wait     V  - CSV Reports            
               X - Export Monitor Data            J  - Display Job Card       
                                                                             
LC Profile  Use DB2 Created  Date        Time     Changed  Date        Time   
            Catalog By       Created     Created  By       Changed     Changed
   ________ _______ ________ ___________ ________ ________ ___________ ________
<>-----------------------------------------------------------------------------
__ USER160T NO      USER160  2013/05/07  15:22:58                    
__ USER604T NO      USER604  2013/03/19  14:58:03 T434604  2013/03/19  15:00:41
__ USER797T NO      USER797  2013/03/20  10:05:26 T046760  2013/05/16  08:57:40
__ USER797T NO      USER797  2013/03/20  10:39:00                    
__ USER760T NO      USER760  2013/05/16  08:59:42                    
__ ZZBB3510 NO      Pre R9.0 2013/04/24  14:21:23                    
__ ZZQ91200 NO      Pre R9.0 2013/04/24  14:21:23                    
__ ZZQ91221 NO      Pre R9.0 2013/04/24  14:21:23                    
__ ZZQ91222 NO                                                       
__ ZZQ91231 NO      Pre R9.0 2013/04/24  14:21:23                    
__ ZZQ91232 NO      Pre R9.0 2013/04/24  14:21:23

Solution:

When a monitor definition is created in PMA (former APC) there is no CREATOR ID in the field 'Created By'.
PMA doesn't provide one.

If this field contains the value 'Pre R9.0' or 'Pre R8.5', the monitor definition is from PMA (or former APC) created in a previous release and migrated, or copied into the current release.

Environment:

Release:
Component: MATUNE