UIM - Xendesktop probe Establishment Time metric
Article ID: 197424
Updated On:
Products
NIMSOFT PROBES
DX Infrastructure Management
Issue/Introduction
The Xendesktop probe has an Establishment Time metric.
The QoS name is QOS_XENDESKTOP_BROKERSESSION_ESTABLISHED_TIME
However in the template there is no possibility to enable the Data for this metric. Alarms can be enabled but not Data.
|
Establishment Time
|
QOS_XENDESKTOP_BROKERSESSION_ESTABLISHED_TIME
|
String
|
Time the session was established
|
1.0
|
However in the template there is no possibility to enable the Data for this metric. Alarms can be enabled but not Data.
Why is that?
Environment
Release : 20.1
Component : UIM - XENDESKTOP
Resolution
Establishment Time only allows the enabling/disabling of alarms and the 'data' so to speak is just a string containing the time that the Broker Session was established. It is, in effect, a single data point against which the alarm settings are compared. This is also true of a few other metrics in the template. They are purely there to aid with alarm comparisons.
So it is correct that there is no QoS associated with the metric.
Feedback
Yes
No
Powered by
