ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
Post migration errors.
Article ID: 196821
Updated On:
Products
CA Infrastructure Management
CA Performance Management - Usage and Administration
DX NetOps
Issue/Introduction
Hi,
We migrated Performance Management from RHEL 6 to RHEL 7 yesterday and did the normal task such as updating the Vertica Database to the current, updating the VIP and DNS to point to the new environment. Now, I am getting errors on things that worked prior to migration. Please see error below:
Query failed. See the logs for details. (Query ID: 989a208b-126b-4641-8a29-c9d0a9576315)
User Group: Jp For CAT Pilot Net Time Range: Last 7 Days
Resolution: Hourly Roll-up (Default)
We migrated Performance Management from RHEL 6 to RHEL 7 yesterday and did the normal task such as updating the Vertica Database to the current, updating the VIP and DNS to point to the new environment. Now, I am getting errors on things that worked prior to migration. Please see error below:
Query failed. See the logs for details. (Query ID: 989a208b-126b-4641-8a29-c9d0a9576315)
User Group: Jp For CAT Pilot Net Time Range: Last 7 Days
Resolution: Hourly Roll-up (Default)
Environment
Release : 3.7
Component : CA DATABASE COMMAND CENTER
Resolution
The report was corrupt ,rebuilt the report.
Feedback
Yes
No
Powered by
