ALERT: Some images may not load properly within the Knowledge Base Article. If you see a broken image, please right-click and select 'Open image in a new tab'. We apologize for this inconvenience.
CA Deliver - Deliver not populating the CA Spool Userdata in the SAR section of the report attributes
Article ID: 196818
Updated On:
Products
Deliver
View
Issue/Introduction
In a new setup of CA Spool, Deliver bundle information not appearing in the Userdata fields.
Environment
Release : 12.2
Component : CA Deliver
Resolution
The client needed to have the following:
. Set Deliver RMOPARM OUTPUT=YES (from the default of =NO).
. In the Deliver Bundle Definition, for the BDist name, in that corresponding Distribution ID information, the field "CA Connect Node ===> YES" was set, which subsequently allowed for the information to be passed to CA Spool.
. Set Deliver RMOPARM OUTPUT=YES (from the default of =NO).
. In the Deliver Bundle Definition, for the BDist name, in that corresponding Distribution ID information, the field "CA Connect Node ===> YES" was set, which subsequently allowed for the information to be passed to CA Spool.
Feedback
Yes
No
Powered by
