CA View - Unable to print using SARBCH, After Upgrade to 14.0.

book

Article ID: 196312

calendar_today

Updated On:

Products

CA Deliver CA View

Issue/Introduction

After upgrading to View 14.0, we are getting a message when we are trying batch print:

SARBCE02  User not authorized to access sysout

 

Environment

Release : 14.0

Component : CA View

Resolution

The client had recently upgraded to View 14.0, which contained error PTF SO10882.
It was suggested that the client apply the below PTF:

APAR #: SO12369 / Product: VIEW / Release: 14.0 / Solution #: 89
Title: INABILITY TO TURN OFF THE ADDITIONAL SARBCH SECURITY

***NOTE*** This PTF corrects PE PTF SO10882

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

PROBLEM DESCRIPTION:


After applying PTF SO10882, which provides additional internal security validation for the SARBCH /BPRINT, /CHANGE, /DELETE, /EPRINT, /INDEX, /LOAD, /PERM,    /PRINT, /PRINTIDX, and /PRINTJOB control statements, SARBCH may end with a non-zero return code.

Although not a defect, this change in product behavior may have a significant impact on the existing customer's environments and security configurations.

As such, we'd like to rework the PTF to also provide a way for customers to revert to the original product behavior (without using additional security validation for              SARBCH), if desired.

Also give the client the ability to Enable (if desired) the new validation code at a later date after they make all necessary rule and definition changes needed in their          environment.

=================================================================================================================

With application of the above, the client was able to return to using their original security configurations.