Prediction not given on Jobstream alerts - Prediction took longer than threshold.JobStream

Products

• Automic Automation Intelligence

Issue/Introduction

Prediction not given on Jobstream alerts.

Jaws.log shows:

WARN [AutosysPredictionEngine] Prediction for <JobstreamName> at 2020/07/16 06:00:00.000 EDT timed out.  Timeout period is 30

Environment

Release : 5.8.6

Component : AUTOMIC AUTOMATION INTELLIGENCE ENGINE

Resolution

This can occur if trimming is not setup on a Jobstream or if the trimming is not trimming enough runs. 

Ideally you should use the Auto Trim Options which are enabled by default.

Additional Information

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/intelligent-automation/automic-automation-intelligence/6-0-0/Administrator_User_Guide_5/Chapter_3_Understanding_Jobstream_Analysis_13/Adding_a_New_Jobstream_18/New_Jobstream__Trimming_Tab_22.html