Release : 9.1.0
Component : UIM - CDM WITH IOSTAT 6.42
Select the disk in cdm GUI, rt-click and delete it. Then restart the probe.
Additionally, you could set the monitoring up under the cdm Custom Tab for the /app filesystem so you can ensure that an alarm is generated if the xfs f/s becomes unavailable.
You can configure Disk Missing alarms via the Admin Console by enabling the default or configure separately via the Custom Tab in the IM.
Under the Disk Missing Defaults section, update the following information to configure default parameters for missing disks:
Disk Missing Alarm:
- enables the probe to generate an alarm if a monitored disk is missing from the host.
- specifies the alarm message to generate if a monitored disk is missing from the host.