CA 1 Tape Management - Userexit TMSXITJ intermittently abending s0C4-11 at offset +9E

Article Id: 194920
Status: Published
Updated On: 16-07-2020 16:33
Products:
CA 1 Tape Management , CA 1 Tape Management - Copycat Utility , CA 1 Tape Management - Add-On Options
Issue/Introduction:

Intermittent failure in TMSXITJ which produces a synchronous dump ABEND0C4-11.  

Cause:

bad hardcoded parameter list being passed to the CA1 userexit

Environment:

Release : 14.0

Component : CA 1 Tape Management

Resolution:

Set up the following in CTAPOPTN(TMOKEYxx)  and there is not need to use or turn on the TMSXITJ exit 

KWORD=TMACCT1        
FROM=ACCOUNTING      
OFFSET=0             
LENGTH=13            
DELIMITR=(ACCT=)     
XCOR=55              
YCOR=01  

Additional Information:

For more information on defining keywords in TMOKEYxx , please see:

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-mainframe-software/performance-and-storage/ca-1-tape-management-system/14-0/programming/options-summary/tmokeyxx-options-table.html