CA 1 Tape Management -CA 1 HAS DETECTED THAT ONE OR MORE TAPE INTERCEPTS ARE NOT ACTIVE! TAPES MAY NOT BE PROTECTED AND TAPE ACTIVITY MAY NOT BE RECORDED

Products

• CA 1 Tape Management
• CA 1 Tape Management - Copycat Utility
• CA 1 Tape Management - Add-On Options

Issue/Introduction

 IEF233A M 03B1,SCRTCH,SL,jjjjjjjjj,dddddddd                  
 IECTMS9 dddd,vvvvvv,jobname,ddname,expdt,fsq,dsname

 IEC705I TAPE ON uuuu,vvvvvvv,SL,dsn
 *CAL0999E CA 1 HAS DETECTED THAT ONE OR MORE TAPE  642        
                INTERCEPTS ARE NOT ACTIVE! TAPES MAY NOT BE               
                PROTECTED AND TAPE ACTIVITY MAY NOT BE                    
                RECORDED.                                                 
                                                                          
The above messages appeared during tape activity after starting CA 1                                                                         

Environment

Release : 14.0

Component : CA 1 Tape Management

Resolution

This means that CA 1 may not have been recording tape activity since CA was last started .

You can run the SMF Recovery Utility TMSSMF to capture tape information from SMF data for the time period when the operating intercepts were not active .

More details can be found at :

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-mainframe-software/performance-and-storage/ca-1-tape-management-system/14-0/utilities-and-reports/tmssmf-utility-recover-tape-activity-from-smf-data.html