Endevor batch job NDVRBAT failing with RC=0008 (SMGR123C)
Article ID: 193485
Updated On:
Products
Issue/Introduction
Endevor batch job is ending with a RC=0008 on the NDVRBAT step for the program NDVRC1. Below is the message at C1MSGS1 for RC=0008.
In other cases when executing any element when moving element from D1 to D2 also, the execute process is giving a RC = 0008. Why is the job failing with the NDVRC=0008
C1X0010I STEP DELETE PROGRAM CONDELE COMPLETED, RC=0000
C1G0144I PROCESSOR DELETE EXECUTION COMPLETED, HIGHEST PROCESSOR STEP RC WAS 0000
SMGR112I COMPONENT VVLL 0100 DELETED FROM LOCATION env/#/sys/subs/type
SMGR112I ELEMENT VVLL 0102 DELETED FROM LOCATION env/#/sys/subs/type
C1G0200I ELEMENT ACTION REQUEST PROCESSING COMPLETED, HIGHEST ENDEVOR RC WAS 0008
PROC NDVR +------------ INVENTORY INFORMATION -----------+ ACTION ACTION STMT SCL
ACTION ELEMENT RC RC ENVIRONMENT SYSTEM SUBSYSTEM TYPE STAGE TIME NUMBER NUMBER WRITTEN
MOVE ELEMENT1 0000 0008 ENV SYS SUBS TYPE # 13:07:22 1 2
END OF EXECUTION LOG - HIGHEST ENDEVOR RC = 0008
ENMP092I Cautionary message(s) issued during execution of 'PACKAGE1'
ENBP023I The EXECUTE action has completed for package ID 'PACKAGE1'. Return Code is 8
ENBP010I Processing is complete. Highest return code is 8
Environment
Release : All supported releases
Resolution
The reason for the NDVR RC=8 is below:
13:07:22 C1G0202I ACTION #1 / STMT #2
13:07:22 C1G0203I MOVE ELEMENT ELEMENT1
13:07:22 C1G0204I FROM ENVIRONMENT: ENV SYSTEM: SYS SUBSYSTEM: SUBS TYPE: TYPE STAGE ID: #
13:07:22 C1G0232I OPTIONS: SIGNIN
13:07:22 C1G0265I PROCESSOR GROUP PRGROUP1 FOR THIS ELEMENT WAS OBTAINED FROM ENVIRONMENT MAP
13:07:24 SMGR136I ELEMENT VVLL 0102 CHANGES INCLUDE 59 LINES INSERTED AND 9 LINES DELETED
13:07:24 SMGR123C 67% PRIOR INSERTS DELETED AND/OR 01% PRIOR DELETES RE-INSERTED
13:07:24 SMGR130I ELEMENT VVLL 0102 CREATED AT LOCATION ENV/#/SYS/SUBS/TYPE
13:07:24 C1G0143I BEGINNING EXECUTION OF MOVE PROCESSOR MOVPROC OF GROUP GROUP1.
The SMGR123C message will produce a RC=8 - To change the SMGR123C to always return a W level which would be a RC=4 a modification to the TYPE DEFINITION Panel nee PNGSRC.
Below is an example of a type def screen that has the REGRESSION SEVERITY (REG SEV) set to C which produced the RC=8. If you want to get a rc=4 set the REG SEV to W.
DISPLAY ---------------------- TYPE DEFINITION ------------------------------
COMMAND ===>
CURRENT ENV: ENV1 STAGE ID: 1 SYSTEM: SYSTEM1 TYPE: COBOL
NEXT ENV : ENV1 STAGE ID: 2 SYSTEM: SYSTEM1 TYPE: COBOL
DESCRIPTION: ===> COBOL SOURCE CODE
UPDATED: 17AUG10 16:08 BY USERID1
----------------- ELEMENT OPTIONS -------------------
DELTA FORMAT(F/R/I/L) ===> R SOURCE LEN ===> 80 ELE RECFM(N/F/V) ===> N
COMPRESS/ENCRYPT(Y/N) ===> Y COMPARE FROM ===> 7 DFLT PROC ===> CLENBL
AUTO CONSOL (Y/N) ===> Y COMPARE TO ===> 72 LANGUAGE ===> COBOL
CONSOL AT LVL ===> 96 REGRESSION ===> 80 PV/LB LANG ===> COBOL
LVLS TO CONSOL ===> 49 REG SEV(I/W/C/E) ===> C DATA FORMAT(T/B) ===> T
USS RECFM(COMP/CR/CRLF/CRNL/F/LF/NL/V) ===> NL FILE EXT ===> CBL
----------------- COMPONENT LIST OPTIONS ------------------
FWD/REV DELTA(F/R) ===> R AUTO CONSOL (Y/N) Y CONSOL AT LVL 96
LVLS TO CONSOL 25
------------------------- LIBRARIES -----------------------
BASE/IMAGE LIBRARY ===> xxx.&C1SY..&C1ST..BASE
DELTA LIBRARY ===> xxx.&C1SY..&C1ST..DELTA.BDAM
INCLUDE LIBRARY ===>
SOURCE O/P LIBRARY ===>
EXPAND INCLUDES(Y/N) ===> N
Feedback
