Endevor batch job failing with NDVRC=0008

book

Article ID: 193485

calendar_today

Updated On:

Products

CA Endevor Software Change Manager (SCM) CA Endevor Software Change Manager - Natural Integration (SCM) CA Endevor Software Change Manager - ECLIPSE Plugin (SCM) CA Endevor Software Change Manager - Enterprise Workbench (SCM)

Issue/Introduction


Endevor batch job is ending with a  RC=0008 on the NDVRBAT step for the program NDVRC1. Below is the message at C1MSGS1 for RC=0008. In other cases when executing any any element when moving element from D1 to D2 also, the execute process is giving a RC = 0008. Why is the job failing with the NDVRC=0008


C1X0010I  STEP DELETE PROGRAM CONDELE COMPLETED, RC=0000
C1G0144I  PROCESSOR DELETE EXECUTION COMPLETED, HIGHEST PROCESSOR STEP RC WAS 0000
SMGR112I  COMPONENT VVLL 0100 DELETED FROM LOCATION STAGING/4/S2K/S2K/PNGSRC
SMGR112I  ELEMENT VVLL 0102 DELETED FROM LOCATION STAGING/4/S2K/S2K/PNGSRC
C1G0200I  ELEMENT ACTION REQUEST PROCESSING COMPLETED, HIGHEST ENDEVOR RC WAS 0008


                                     PROC  NDVR   +------------  INVENTORY  INFORMATION  -----------+                 ACTION   ACTION    STMT       SCL
ACTION    ELEMENT      RC    RC    ENVIRONMENT   SYSTEM    SUBSYSTEM   TYPE     STAGE    TIME        NUMBER  NUMBER WRITTEN
MOVE      @RAS02      0000  0008   STAGING              S2K            S2K                   PNGSRC        4    13:07:22       1            2
END OF EXECUTION LOG - HIGHEST ENDEVOR RC = 0008


ENMP092I  Cautionary message(s) issued during execution of 'S2K001316'
ENBP023I  The EXECUTE action has completed for package ID 'S2K001316'.  Return Code is 8

ENBP010I  Processing is complete.  Highest return code is 8

Environment

Release : 18.0

Component : CA Endevor Software Change Manager

Resolution

The reason for the NDVR RC=8 is below:

13:07:22 C1G0202I ACTION #1 / STMT #2
13:07:22 C1G0203I MOVE ELEMENT @RAS02
13:07:22 C1G0204I FROM ENVIRONMENT: STAGING SYSTEM: S2K SUBSYSTEM: S2K TYPE: PNGSRC STAGE ID: 4
13:07:22 C1G0232I OPTIONS: SIGNIN
13:07:22 C1G0232I COMMENT: set cust notes from user table entries
13:07:22 C1G0265I PROCESSOR GROUP OSB2PNG FOR THIS ELEMENT WAS OBTAINED FROM ENVIRONMENT MAP
13:07:24 SMGR136I ELEMENT VVLL 0102 CHANGES INCLUDE 59 LINES INSERTED AND 9 LINES DELETED
13:07:24 SMGR123C 67% PRIOR INSERTS DELETED AND/OR 01% PRIOR DELETES RE-INSERTED
13:07:24 SMGR130I ELEMENT VVLL 0102 CREATED AT LOCATION PROD/5/S2K/S2K/PNGSRC
13:07:24 C1G0143I BEGINNING EXECUTION OF MOVE PROCESSOR MOVECOB OF GROUP OSB2PNG.

The SMGR123C message will produce a RC=8 - To change the  SMGR123C to  always return a W level which would be a RC=4 a modification to the TYPE DEFINITION Panel nee PNGSRC.

Below is an example of a type def screen that has the REG SEV set to C which produced the RC=8. If you want to get a rc=4 set the REG SEV to W.