By default what Alarms from the VNA Viptela SDWAN API integration are shown in Spectrum ?

Products

• CA Spectrum
• CA Virtual Network Assurance

Issue/Introduction

By default, what Alarms from the VNA Viptela SDWAN API integration are shown in Spectrum ?

 

 

 

 

Environment

Spectrum Release : 10.4.0

Component : Spectrum VNA Integration

VNA  Release 3.7.10

Cause

No Cause, this information is not documented

Resolution

For non SNMP traps, the VNA Viptela to Spectrum Mappings are to event 0x673000b or 0x673000c, and depending on the event content, other events will be generated.

 

 

Viptela Alarm	Spectrum	Entity	Alarm to Entity mapping field
BFD node down	alarm	vEdge	system-ip
BFD site down	alarm	Site	site-id
BFD TLOC down	alarm	vEdge	system-ip
BGP router down	alarm	vEdge	system-ip
Control all vSmarts down	alarm	vEdge	system-ip
Control node down (vEdge)	alarm	vEdge	system-ip
Control site down	alarm	Site	site-id
Control TLOC down	alarm	vEdge	system-ip
Control vSmart down	alarm	vSmart	system-ip
Interface_State_Change	alarm	Interface	systemIp + "-" + vpnId + "-" + ifName + "-" + afType
OMP all vSmarts down	alarm	vSmart	system-ip
OMP node down	alarm	vEdge or vSmart	system-ip
OMP site down	alarm	Site	site-id
OSPF router down	alarm	vEdge	system-ip
Viptela Events	Spectrum	Entity	Event to Entity mapping field
sla-changed	event	Tunnel	local-system-ip + "-" + local-color + "-" + remote-system-ip + "-" + remote-color
bfd-state-changed	event	Tunnel	local-system-ip + "-" + local-color + "-" + remote-system-ip + "-" + remote-color