CA Spectrum - Upgrading Spectrum SRadmin, Spectrum & SDC
search cancel

CA Spectrum - Upgrading Spectrum SRadmin, Spectrum & SDC

book

Article ID: 191281

calendar_today

Updated On:

Products

CA Spectrum

Issue/Introduction

When starting upgrade by clicking setupnt.exe file we get 3 possibilities, need details of each:

Install DX NetOps Spectrum Remote Administration (On which server? SpectroServer or OneClick server)
Install DX Netops Spectrum 
Install DX NetOps Spectrum Secure Domain Connector (On which server? SpectroServer or OneClick server)

Environment

Release : 10.X

Component : Spectrum Core / SpectroSERVER

Resolution

1) Install SRAdmin from the SRAdmin GUI when you want to perform a remote installation or a local distributed installation of CA Spectrum. You can also install SRAdmin from the SRAdmin GUI as an alternative to using the CA Spectrum GUI installation to perform a local CA Spectrum installation.

Note: If you are upgrading CA Spectrum from a post 9.0 release, you do not need to install SRAdmin. SRAdmin is automatically upgraded.

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/spectrum/10-4-1/installing-and-upgrading/fresh-install/sradmin-installation-methods.html

2) Upgrade the SpectroSERVER and OneClick machines.
Run Install DX Netops Spectrum 

3) If you don't have Secure Domain Connector, you don't have to run Install the DX NetOps Spectrum Secure Domain Connector.
The Secure Domain Connector is installed on a third machine to connect the the Secure Domain Manager running on the SpectroSERVER machine.

Additional Information

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/spectrum/10-4-1/installing-and-upgrading/upgrading.html